Featured articles — ESI Group

Document Actions

Featured articles

Numerical simulation of the protective gas electro slag remelting process and its industrial validation.

By A. Mackenbrock, V. Maronnier, O. Köser, from ESI Group, and W. Schützenhöfer , G. Reiter, R. Tanzer from Böhler Edelstahl GmbH & CoKG, Austria.

(Steelsim Conference, Graz, Austria, 2007)

Selected numerical investigations on ESR process

By A. Kharicha, A. Ludwig , M. Wu from the University of Leoben (MUL), Austia; V. Maronnier, O. Köser, A. Mackenbrock from ESI Group, and W. Schutzenhofer, R. Tanzer from Böhler Edelstahl GmbH (BEG), Austria.

(LMPC Conference, Nancy, France, 2007)

Modelling of the protective gas electro slag remelting process and its validation

By W. Schützenhöfer, G. Reiter, R. Rabitsch from Böhler Edelstahl GmbH (BEG); A. Ludwig, A. Kharicha from University of Leober (MUL), Austria; M. Gäumann, V. Maronnier, A. Mackenbrock from ESI Group; H. Scholz, R. Sorci, F. Arcobello-Varlese, A. Carosi from Centro Svilluppo Materiali (CSM), Italy.

(TOOL7th, Turin, Italy, 2006)

Previsão automática de propriedades de material para a simulação de processos de fundição e sua Influência nos resultados Obtidos

By Arthur Camanho, ESI Group

(CONAF 2007, September 2007)

Modeling and experimental validation of microstructure and mechanical properties of ductile iron during solidification

By Jianzheng Guo and Mark T.Samonds, ESI Group

(Proceedings of the 5th Decennial International Conference on Solidification Processing, Sheffield, July 2007)

Prediction of hot tearing during alloy solidification

By J.Guo and J.Z.Zhu, ESI Group

(Proceedings of the 5th Decennial International Conference on Solidification Processing, Sheffield, July 2007)

Giessereisimulation der nächsten Generation

By Ole Köser & Marco Aloe, ESI Group

(Giesserei-Praxis, June 2007)

Advanced metal casting simulations save time and cost

(Cast Metal & Diecasting Times, April-May 2007)

Intégration des Techniques avancées de simulation dans le développement process en fonderie

By Adi Sholapurwalla & Sam Scott , ESI Group

Extrait d'une conférence présentée au Congrès de Fonderie de l'AFS en mars 2006

(Hommes & Fonderie, Mai 2007)

Die Casting Simulation Solves Non-Fill Problem, Saving $ 50, 000-Plus Per Year

By Krishnan Venkatesan, Citation Corporation Novi, Michigan

(Die Casting Engineer, May 2007)

Reinventing the Wheel

By Thomas Pyttel, Elke Lieven, Adi Sholapurwalla, Sam Scott & Ole Koeser, Esi Group

(Die Casting Engineer, January 2007)

Simulazione di Colata Continua / Continuous Casting

By Ole Koeser & Marco Aloe, ESI Group - Lorenzo Valente, Ecotre SAS

(Pressocolata & Tecniche Fusorie, December 2006)

Alloy Shrinkage Factors for the Investment Casting Process

By Adrian S.Sabau

( Mettalurgical and Materials Transactions B Volume 37B, February 2006)

ESI Group renforce sa position dans l'industrie de la fonderie française

Par Gilles Croisonnier, ESI Group

(Hommes & Fonderie, Décembre 2006)

Effect of Radiation Heat Transfer on Part Quality Prediction
By Adi Sholapurwalla & Sam Scott, ESI Group

Why is the computer modelling needed in casting ?
By Wojciech Kapturkiewicz, AGH University of Science and Technology, Krakow, Poland ( Przeglad Odlewnictwa, 2005)

Computer Simulation and Analysis of Investment Casting Process
By Dr S.Shamasundar et al, AFTC, Bangalore, India
And Mr D. Ramachandran et al, Texmo Precision Castings, Coimbatore, India

Property Prediction with macro micro-modeling and computational thermodynamics
By Jianzheng Guo, Mark T.Samonds

Gravity Die Casting Process - Die Design and Process Optimisation By Dr Janagan, Ennore Foundries Limited, Chennai, India And Dr S.Shamasundar et al, AFTC, Bangalore, India
Simulating the Lost Foam Casting Process By A.Paine, M.Gaumann, M.Gremaud, ESI Group Une productivité augmentée de 30% By Nicolas Henchoz (Revue Technique Suisse, octobre 1994)
Application of Mathemathical models to Optimization of Cast start practice for DC Cast Extrusion Billets By J.F Grandfield & L. Wang (Lights Metals, 2004)
Heat Transfer Boundary conditions for the numerical simulation of the DC Casting process By Adrian Sabau, Kazunori Kuwana, Srinath Viswanathan, Kozo Saito, and Lee Davis (Light Metals, 2004)
Shape prediction - simulation of dimensional changes in complex steel castings By Stefan Gustafsson Ledell, Swedish Foundry Association
Simulation of Solidification Process Used in Twin Roll Casting By Kemal Sarioglu of Assan Aluminium Works and Philippe Thévoz of Calcom ESI
Prédiction des Structures de Grains durant la Solidification Dirigée de Superalliages en Fonderie By Serge Fargeas and Stéphane Fréchinet, of Snecma Motors (Matériaux, 2002)
Mould Fill Simulation to Improve the Quality of a Component By Th. Imwinkelried, H. Homberger, of Alusuisse Technology and Management Ltd (Magnesium Industry, April 2001)
Die Herstellung von Gegossenen Profilwalzen By Hartmut Polzin, of Walzengiesserei Coswig GmbH (Giesserei-Praxis, 2002)
CAE Techniques for Casting Optimisation By Maria José Marques, of INEGI - Instituto de Engenharia Mecânica e Gestão Industrial
Application of Numerical Modelling in SSM Automotive Brake Calliper Castings By <>N.Jahajeeah, R. Bruwer, O. Damn, L. Ivanchev, P. Rossouw, K. Sharma, of National Product Development Centre, CSIR, Pretoria, South Africa (Proceedings of the 7th International Conference on Advanced Semi-Solid Processing of Alloys and Composites, Tsukuba, Japan, September 2002)
Engine Design Using State-of-the-art Tool By Dr. Thomas Schuszter and Helmut Christl, of MAN B&W, Augsburg, Germany (Man B&W Meeting of licensees Augsburg, 2002)